LFR EXTENDED RANGE
FLAT SPRAY TIP

RAINDROP® DRIFT REDUCTION
FLAT SPRAY TIP
For extended pressure ranges with consistent pattern
Replaces "XR" Tips

COLOR JET® STAINLESS STEEL ORIFICE INSERT TIPS- STAINLESS STEEL DURABILITY AT A LOWER COST

GP/Delavan is now offering stainless steel orifice insert tips in a thermoplastic body. You can have the wear life of stainless steel at a lower cost than solid stainless steel tips with more visible color coding.

* Offers consistently better pattern across wide pressure ranges, from 15 to 60 psig, when compared to conventional flat spray tips. Higher pressures offer the advantage of increased penetration and finer coverage of smaller droplets. At lower pressures, drifting of chemical spray is decreased by reducing the number of driftable "fines."
* Color-coded by flow  rate for easy identification.
* Reduces plugging because of larger passages. When using LFR Flat Spray tips at lower pressures, a larger tip is used to produce the same gallons per acre as a standard flat spray tip, thus, larger passages.
 * A new outlet configuration reduces spray liquid buildup on the tip to help keep the spray pattern uniform.
* Also available in brass, stainless steel, and thermoplastic		 RF FLAT SPRAY TIPS FOR BROADCAST SPRAYING
This 1050-1150 flat fan, drift-reduction nozzle tip replaces conventional flat fan 1100 tips in broadcast applications when you want to reduce spray drift. When compared to a conventional flat fan tip, the RF flat spray Raindrop tip produces fewer driftable "fines" with the same coverage. Our research shows that RF flat spray Raindrop tips flowing .5 gpm at 40 psig have only 3% driftable fines (the percent of spray volume under 200 microns) compared to 7-20% for standard flat fan tips.
* Color-coding makes it easy to match nozzle flow rates for easy identification.
* Recessed orifice minimizes chances for damage.
* Wrench flats provide for each pattern alignment when used with standard caps and bodies. Use with DELA-FIT/
QUICK CHANGE cap and bodies for quick-attach pattern alignment.
* Available in stainless steel and thermoplastic with a spray angle of 1050-1150
Recommended overlap: 50%

 
A. 20" spacing
B. 15"-18" height
C. 800 tip
D. 30" spray coverage
E. 50% overlap

A. 30" spacing
B. 15"-18" height
C. 1100 tip
D. 45" spray coverage
E. 50% overlap

Nozzle
Tip
Number

PART NUMBERS
Thermoplastic Body
SS Orifice

ISO
Bulk Delepak

LFR SS
Orifice Insert
Flat Fan
Tips

 80-1.5R 50403-1N  
80-2R 50403-2N  
80-3R 50403-3N  
80-4R 50403-4N  
80-5R 50403-5N  
80-8R 50403-8N N0073-1120
110-2R 50403-12N N0073-1122
110-3R 50403-13N  
110-5R 50403-15N  

Nozzle
Tip
Number

PART NUMBERS

BRASS

STAINLESS STEEL

THERMOPLASTIC

Bulk

Delapak

Bulk

Delapak

Bulk

Delapak

Color Jet®
LFR
Flat Fan
Tips

 80-1.5R 48984-3 00073-999    
80-2R 48984-6 00073-1002 48984-4N  
80-3R 48984-9    
80-4R 48984-12 00073-1009 00073-1008   N0073-1007
80-5R 48984-15 00073-1011    
80-6R 48984-18 00073-1014 48984-16N  
80-8R 48984-21 00073-1018 48984-19N  
80-10R 48984-26 48984-23 00073-430
80-15R 48984-27 48984-24 00073-433
80-20R 48984-28   00073-434
110-1.5R 50044-1 00073-1143 50044-8
110-2R 50044-2 00073-1144 00073-1153 50427-2N N0073-1137
110-3R 50044-3 00073-1145 00073-1154 50427-3N N0073-1138
110-4R 00073-1146 50044-11 00073-1155 50427-4N N0073-1139
110-5R 50044-5 00073-1147 00073-1156    
110-6R 50044-6 00073-1148 00073-1157 50427-6N  
110-8R 50044-7 00073-1149 00073-1158    
           LFR, RAINDROP CAPACITY CHART

Nozzle Tip Number

Pressure
(psig)

Capacity
1-Nozzle
(GPIM)

Capacity
1-Nozzle
(oz/mn)

20" Spacing
Gallons per Acre (GPA)
Based on Water

30" Spacing
Gallons per Acre (GPA)
Based on Water

  
 

ISO
Color

4
MPH

5
MPH

6
MPH

7.5
MPH

10
MPH

4
MPH

5
MPH

6
MPH

7.5
MPH

10
MPH

  
 


80 - .67R
110 - .67R

(100 mesh)
BR, SS, TH

  15  .041  5.2  3.0  2.4  2.0  1.6  1.2            
 20  .047  6.0  3.5  2.8  2.3  1.9  1.4            
 25  .053  6.8  3.9  3.1  2.6  2.1  1.6            
 30  .058  7.4  4.3  3.4  2.9  2.3  1.7            
 40  .067  8.6  5.0  4.0  3.3  2.7  2.0            
 50  .075  7.3  5.6  4.4  3.7  3.0  2.2            
 60  .082  10.5  6.1  4.9  4.1  3.2  2.4            

65 - 1
80 - 1R
110 - 1R

(100 mesh)
BR, SS, TH, RF1

  15  .061  7.8  4.5  3.6  3.0  2.4  1.8            
 20  .071  9.0  5.3  4.2  3.5  2.8  2.1            
 25  .079  10.1  5.9  4.7  3.9  3.1  2.3            
 30  .087  11.1  6.4  5.1  4.3  3.4  2.6            
 40  .10  12.8  7.4  5.9  4.9  4.0  3.0            
 50  .11  14.1  8.3  6.6  5.5  4.4  3.3            
 60  .12  15.4  9.1  7.3  6.1  4.8  3.6            

80 - 1.5R
110 - 1.5R

(100 mesh)
BR, SS, TH, RF1.5

 15  .092  11.7  6.8  5.5  4.5  3.6  2.7  4.6  3.6  3.0  2.4  1.8  
 20  .11  14.1  7.9  6.3  5.3  4.2  3.2  5.4  4.4  3.6  2.9  2.2  
 25  .12  15.4  8.8  7.0  5.9  4.7  3.5  5.9  4.8  4.0  3.2  2.4  
 30  .13  16.6  9.6  7.7   6.4  5.1  3.9  6.4  5.1  4.3  3.4  2.6  
 40  .15  19.2  11.1  8.9  7.4  5.9  4.5  7.4  5.9  5.0  4.0  3.0  
 50  .17  21.8  12.5  10.0  8.3  6.6  5.0  8.4  6.7  5.6  4.5  3.4  

 ISO

  60  .18  23.0  13.6  10.9  9.1  7.3  5.5  8.9  7.1  5.9  4.8  3.6  

80 2R
110 - 2R

(50 mesh)
BR, SS, TH, RF2

 15  .12  15.4  9.1  7.3  6.1  4.8  3.6  5.9  4.8  4.0  3.2  2.4  
 20  .14  17.9  10.5  8.4  7.0  5.6  4.2  7.0  5.6  4.7  3.7  2.8  
 25  .16  20.5  11.7  9.4  7.8  6.3  4.7  7.9  6.3  5.3  4.2  3.2  
 30  .17  21.8  12.9  10.3  8.6  6.9  5.1  8.6  6.9  5.7  4.6  3.4  
 40  .20  25.6  14.8  11.9  9.9  7.9  5.9  9.9  7.9  6.6  5.3  4.0  
 50 .22  28.2  16.6  13.3  11.1  8.9  6.6  11.1  8.9  7.4  5.9  4.4  

ISO

  60  .24  30.7  18.2  14.5  12.1  9.7  7.3  12.1  9.7  8.1  6.5  4.8  

80 - 3R
110 - 3R

(50 mesh)
BR, SS, TH, RF3

 15  .18  23.6 13.5  10.9  9.1  7.3  5.5  8.9  7.1  5.9  4.8  3.6  
 20  .21  26.8  15.8  12.6  10.5  8.4  6.3  10.4  8.3  6.9  5.5  4.2  
 25  .24  31.7  17.6  14.1  11.7  9.4  7.0  12.1  9.7  8.1  6.5  4.8  
 30  .26  33.3  19.3  15.4  12.9  10.3  7.7  12.9  10.3  8.6  6.9  5.1  
 40  .30  38.4  22  17.8  14.9  11.9  8.9  14.8  11.9  9.9  7.9  5.9  
 50  .34  43.5  25  19.9  16.6  13.3  10.0  16.8  13.5  11.2  9.0  6.7  

ISO

  60  .37  47.4  27  22  18.2  14.5  10.9  18.3  14.6  12.2  9.8  7.3  

80 - 4R
110 -4R

(50 mesh)
BR, SS, TH, RF4

 15 .24 30.7 18.2 14.5 12.1 9.7 7.3 12.1 9.7 8.1 6.5 4.8  
20 .28 35.8 21 16.8 14.0 11.2 8.4 14.0 11.2 9.3 7.5 5.6  
25 .32 41.0 23 18.8 15.7 12.5 9.4 15.8 12.7 10.6 8.4 6.3  
30 .35 44.8 26 21 17.1 13.7 10.3 17.1 13.7 11.4 9.1 6.9  
40 .40 51.2 30 24 19.8 15.8 11.9 19.8 15.8 13.2 10.6 7.9  
50 .45 57.6 33 27 22 17.7 13.3 22 17.7 14.8 11.8 8.9  

ISO

 60 .49 62.7 36 29 24 19.4 14.5 24 19.4 16.2 12.9 9.7  

80 - 5R
110 - 5R

(50 mesh)
BR, SS, TH, RF5

15 .31 39.7 23 18.2 15.2 12.1 9.1 15.3 12.3 10.2 8.2 6.1  
20 .35 44.8 26 11 17.5 14.0 10.5 17.5 14 11.7 9.3 7.0  
25 .40 51.2 29 23 19.6 15.7 11.7 19.8 15.8 13.2 10.6 7.9  
30 .43 55.0 32 26 21 17.1 12.9 21 17.1 14.3 11.4 8.6  
40 .50 64.0 37 30 25 19.8 14.9 25 19.8 16.5 13.2 9.9  
50 .56 71.7 42 33 28 22 16.6 28 22 18.4 14.8 11.1  

ISO

 60 .61 78.1 45 36 30 24 18.2 30 24 20 16.2 12.1  

80 - 6R
110 - 6R

(50 mesh)
BR, SS, TH, RF6

 15 .37 47.4 27 22 18.2 14.5 10.9 18.3 14.6 12.2 9.8 7.3  
20 .42 53.8 32 25 21 16.8 12.6 21 16.8 14.0 11.2 8.4  
25 .47 60.2 35 28 23 18.8 14.1 23 18.6 15.5 12.4 9.3  
30 .52 66.6 39 31 26 21 15.4 26 21 17.1 13.7 10.3  
40 .60 76.8 45 36 30 24 17.8 30 24 19.8 15.8 11.9  
50 .67 85.8 50 40 33 27 19.9 33 27 22 17.1 13.3  

ISO

 60 .73 93.4 55 44 36 29 22 36 29 24 19.4 14.5  

80 - 8R
110 - 8R

(50 mesh)
BR, SS, TH, RF8

15 .49 62.7 36 29 24 19.4 14.5 24 19.4 16.2 12.9 9.7  
20 .57 73.0 42 34 28 22 16.8 28 22 18.7 14.9 11.2  
25 .63 80.6 47 38 31 25 18.8 31 25 21 16.6 12.5  
30 .69 88.3 51 41 34 27 21 34 27 23 18.3 13.7  
40 .80 102.4 59 48 40 32 24 40 32 26 21 15.8  
50 .89 113.9 66 53 44 35 27 44 35 30 24 17.7  

ISO

 60 .98 125.4 73 58 48 39 29 48 39 32 26 19.4  

80 - 10R
110 - 10R

BR, SS, TH

 15 .61 78.1 45 36 30 24 18.2 30 24 20 16.2 12.1  
20 .71 90.8 53 42 35 28 21 35 28 23 18.7 14.0  
25 .79 101.1 59 47 39 31 23 39 31 26 21 15.6  
30 .87 111.4 64 51 43 34 26 43 34 29 23 17.1  
40 1.0 128.0 75 59 50 40 30 50 40 33 26 19.8  
50 1.1 140.8 83 66 55 44 33 55 44 37 30 22  
60 1.2 153.6 91 73 61 48 36 61 48 40 32 24  

80 - 15R
110 - 15R

BR, SS, TH

 15 .92 117.8 68 55 45 36 27 46 36 30 24 18.2  
20 1.1 140.8 79 63 53 42 32 53 42 35 28 21  
25 1.2 153.6 88 70 59 47 35 59 48 40 32 24  
30 1.3 166.4 96 77 64 51 39 64 51 43 34 26  
40 1.5 192.0 111 89 74 59 45 74 59 50 40 30  
50 1.7 217.6 125 100 83 66 50 83 66 55 44 33  
60 1.8 230.4 136 109 91 73 55 91 73 61 48 36  

80 - 20R
110 - 20R

BR, SS, TH

 15 1.2 153.6 91 73 61 48 36 60 48 40 32.4 24.2  
20 1.4 179.2 105 84 70 56 42 70 56 46 37.4 28  
25 1.6 204.8 117 94 78 63 47 78 61 52 42 31.2  
30 1.7 217.6 129 103 86 69 51 86 68 58 46 24.2  
40 2.0 256.0 149 119 99 79 59 100 80 66 52 39.6  
50 2.2 281.6 166 133 111 89 66 110 88 74 60 44  
60 2.4 307.2 182 145 121 97 73 122 96 80 62 48